Quick Explainer
A New Look
IP addresses are no longer 32-bit and represented by decimals in a dotted quad notation like 10.0.4.1. They're now 128-bit and represented in 32 hexadecimal characters broken down into 8 groups and look like 2001:db8:2458:a2b2:cd47:8abb:8844:1. These groups are sometimes called hextets. They can be a little scary to look at but there are two tricks when writing them to be a little more readable.
- Leading zeros in any hextet can be dropped. So
0db8could be shown as justdb8 - If there are multiple hextets that are empty like
2001:db8:0000:0000:0000:0000:abcd:1they can be shortened to an empty syntax of::. So that address could be shown as2001:db8::1. The only gotcha is that you can only do this once in an address, so if there are two sections with hextets of0000you can only shorten one of them. I thought this would be annoying but I literally haven't run into a situation where that would have been needed.
Terminology
Along with the larger addresses there is some new terminology to get comfortable with. I'll go through the new relevant terms.
Prefixes
IPv6 is all about Prefixes serve as a very similar role to subnet masks in IPv4. It is represented in a similar way to IPv4 CIDR notation.
In IPv6 address 2001:0DB8:0000:000b:0000:0000:0000:001A/64, 2001:0DB8:0000:000b::/64 represents the network prefix and the possible IPv6 addresses ranges from 2001:0DB8:0000:000b:0000:0000:0000:0001/64 to 2001:0DB8:0000:000b:ffff:ffff:ffff:ffff/64.