Skip to main content

Initial Network Setup

Configure Interfaces

We need Internet access to download all the packages necessary so I setup DHCP on the WAN connection eth0.

Setting all the local network interfaces to `manual` and not providing any addresses prevents any accidental routing before everything is secured.

# /etc/network/interfaces
    auto eth0
    iface eth0 inet dhcp
+     
+   auto eth1
+     iface eth1 inet manual
+     
+    auto eth1.8
+    iface eth1.8 inet manual
+            vlan-raw-device eth1
+            
+    auto eth1.9
+    iface eth1.9 inet manual
+            vlan-raw-device eth1

Then restart the networking service to apply the changes and create the new interfaces.

$ systemctl restart networking

Initial Security

Just make sure everything is up-to-date.

$ systemctlapt restartupdate
networking$ apt upgrade
$ apt install fail2ban